FR-4 94V-0 Lead Free Rigid ENIG Double Sided PCB Circuit Board
Specification:
|
Technology
|
Materials
|
|
|
|
|
PCB thickness
|
Final copper
|
|
|
|
|
Conductor track widths
|
Minimum drilling diameter
|
|
|
|
|
Contour production
|
Solder masks
|
|
|
- Photosensitive solder mask systems
- UV solder mask system, screen printing
|
|
Surfaces
|
Additional printing
|
|
|
- Identification printing, inkjet
- Component printing, screen printing
- Through-hole printing
- Peelable solder mask (green mask)
- Masking tape
- Plugging
|
|
Layer
|
12-26
|
|
Material type
|
FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers
|
|
Board thickness
|
0.21mm to 7.0mm
|
|
Copper thickness
|
0.5 OZ to 6 oz
|
|
Size
|
Max. Board Size: 580mm×1100mm
|
|
Min. Drilled Hole Size: 0.2 mm (8 mil)
|
|
Min. Line Width: 4mil (0.1mm)
|
|
Min. Line Spacing: 4mil (0.1mm)
|
|
Surface finishing
|
HASL / HASL lead free, HAL, Chemical tin,
Immersion Silver/Gold, OSP, Gold plating
|
|
Solder Mask Color
|
Green/Yellow/Black/White/Red/Blue
|
|
Tolerance
|
Shape tolerance: ±0.13
|
|
Hole tolerance: PTH: ±0.076 NPTH: ±0.05
|
|
Certificate
|
UL, ISO 9001, ISO 14001
|
|
Special requirements
|
Buried and blind vias+controlled impedance +BGA
|
|
Profiling
|
Punching, Routing, V-CUT, Beveling
|
Double Sided PCB:
A printed circuit board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. Components – capacitors, resistors or active devices – are generally soldered on the PCB. Advanced PCBs may contain components embedded in the substrate.
PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer (outer and inner layers). Conductors on different layers are connected with vias. Multi-layer PCBs allow for much higher component density.
FR-4 glass epoxy is the primary insulating substrate. A basic building block of the PCB is an FR-4 panel with a thin layer of copper foil laminated to one or both sides. In multi-layer boards multiple layers of material are laminated together.
Printed circuit boards are used in all but the simplest electronic products. Alternatives to PCBs include wire wrap and point-to-point construction. PCBs require the additional design effort to lay out the circuit, but manufacturing and assembly can be automated. Manufacturing circuits with PCBs is cheaper and faster than with other wiring methods as components are mounted and wired with one single part. Furthermore, operator wiring errors are eliminated.
When the board has no embedded components it is more correctly called a printed wiring board (PWB) or etched wiring board. However, the term printed wiring board has fallen into disuse. A PCB populated with electronic components is called a printed circuit assembly (PCA), printed circuit board assembly orPCB assembly (PCBA). The IPC preferred term for assembled boards is circuit card assembly (CCA),[1] and for assembled backplanes it is backplane assemblies. The term PCB is used informally both for bare and assembled boards.
Product Tags:
|
|
FR-4 94V-0 Lead Free Rigid ENIG Double Sided PCB Circuit Board Images
|
